www.Dabs.com Dabs Direct Online Store, UK
Spread the Cost … at Dabs Direct Online Electrical Store ~ Big Savings on Computers, Networking, GPS Systems, TV's, and other Electrical Goods

D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+

D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+

The DGS-3420 Series of next generation Layer 2+ Gigabit switches delivers performance, flexibility, security, multi-layer QoS and access control, along with redundant power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP and 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either departmental access layer devices or aggregation switches to form a multilevel network structured with backbone and centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the aggregation of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. Easily deployed and simple to manage, the DGS-3420 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone and centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, and the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth and high port densities on the already cost efficient DGS-3420 Series. The DGS-3420 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. The DGS-3420 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/L4 QoS/CoS solutions help ensure that critical network services such as

learn more about this D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+.


UK Hubs & Switches >> D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+ - Buy it Now

Check for Special Discounts on this D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+


D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+


UK Price: £2,564.74    ★ Buy it now, and Spread the Cost!

Spread the Cost: If you can't afford it right now, then no problem. With a Dabs Direct instant credit account you can spread the cost across weeks or even months, and still enjoy the D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+ right away. So, take advantage of purchasing today, and spreading the cost over up to 36 months.


Other Products from Dabs Direct you may be interested in:

  • D-Link DHP-307AV PowerLine HomePlug AV Network Starter Kit
    The D-Link DHP-307AV kit consists of two PowerLine Homeplug AV network adapters used to distribute Ethernet over standard AC wiring within the home. **Use existing wiring to create a home network** By simply plugging one PowerLine adapter into an existing electrical socket, you can turn every power outlet into a potential network connection, making the DHP-307AV an ideal solution for sharing a high-speed Internet connection or for connecting computers, HD media players, game consoles and Network Attached Storage to your home network. It is also ideal for homes or small offices where concrete walls, successive floors in multi-storied buildings, or other architectural impediments could inhibit a wireless signal1. **200 Mbps transmission with Quality of Service (QoS)** Delivering data transfer rates of up to 200 Mbps2, D-Link's PowerLine Homeplug AV provides ample bandwidth for demanding digital home requirements, such as watching Internet TV or streaming digital music in any room. Advanced technology built into these adapters makes them more resistant to electrical interference from other household appliances, so users can fully benefit from the maximum transmission speeds. In addition to maximum throughput, D-Link's PowerLine Homeplug AV includes a built-in Quality of Service (QoS) engine that prioritises data packets in order to enhance HD video and audio streaming, online gaming and VoIP calling. **Conveniently connect** You can attach a switch or wireless Access Point (AP) to a D-Link PowerLine Homeplug AV Network Adapter, allowing you to connect multiple devices in the farthest corners of your home. Furthermore, D-Link's Powerline Homeplug AV implements 128-bit AES encryption for securing your connection and keeping your data safe from intruders. You can set this up easily via the button on the side of the adapter. **Compatibility** Based on the industry-leading Atheros Homeplug AV technology, the adapters are compatible with other br
  • D-Link 16-port 10/100/1G Smart Switch + 4 RJ45/SFP
    D-Link's DGS-1210 series features D-Link Green technology. Equipped with 16 10/100/1000Mbps ports including 4 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management and security functions that provide performance and scalability. Management options for the switches include SNMP, Web Management, SmartConsole Utility, and compact command lines. The series also supports ACL filtering and D-Link's Safeguard Engine. Furthermore, the DGS-1210 series uses auto voice VLAN, ensuring higher priority for voice traffic. The DGS-1210-16 comes with a fanless design in 19" metal cases. These fans are set to low speed by default and will automatically switch to high speed once the temperature threshold is reached.
  • D-Link INDOOR 802.11A/B/G/N ACC POINT UNIFIED W/ POE
    D-Link's next generation Unified Access Point supporting the IEEE 802.11n standard can be flexibly deployed as a stand-alone "fit" wireless Access Point or as a "thin" managed Access Point (AP) manageable from a wireless switch such as D-Link's DWS-4026. Businesses can start with an intelligent DWL-8600AP then migrate to a centrally managed solution by integrating the same DWL-8600AP to a D-Link unified wired/wireless switch. With Quadband technology, wireless speeds reach up to 300 Mbps in each frequency band simulnaneously. When managed from the switch, the Access Point does not store any setting locally. Power also comes from the switch via 802.3af PoE. The DWL-8600AP continuously tunes itself for optimal RF channel and signal intensity to provide clients with the best wireless signal. It is also able to scan its RF environment, allowing the switch to detect rogue APs. In addition, DWL-8600AP supports 802.1Q VLAN tagging, Load Balancing among Neighbour Aps, up to 16 SSIDs per radio and is Wi-Fi Multimedia (WMM) certified.
  • D-Link 24 x 10/100 L2 PoE Managed Switch+2x1GRJ+2x1GRJ/SF
    The DES-3028P is part of D-Links family of premium devices in the entry-level network management category. With Power over Ethernet (PoE) support, 4 Gigabit uplinks, comprehensive network security, granular bandwidth control and extensive network management, this switch is rich in functions allowing organizations set up secure and effective departmental networks at an affordable cost. The DES-3028P provides 24 Ethernet ports and is equipped with 4 Gigabit uplinks, with the SFP supporting both fiber Gigabit and 100Base-FX fiber connection for specific applications. 802.3af PoE is integrated into every switch port thus, any 802.3af compliant device can be powered by the switch via the standard Ethernet cables, to a maximum of 15.4W per device and 185W for the switch. The DES-3028P includes many security features including Access Control Lists (ACLs), 802.1X Port-Based/MAC-Based Access Control and 802.1X Guest VLAN so that network access is available only to authorized users. To enhance network resilience, the switch supports Spanning Tree protocols, including 802.1D, 802.1w and 802.1s for redundant bridge paths. In addition a unique feature, D-Link Safeguard Engine, allows administrators to configure thresholds that limit the impact of packet flooding to the switch's CPU typically caused by virus/worm outbreaks. This increases the switch's reliability and availability. Network administrators can define throughput levels for each port to manage bandwidth. Fine granularity down to 64 Kbps can be achieved. For Quality of Service (QoS), the switch supports 802.1p Priority Queues and packet classification based on ToS, DSCP, MAC, IP, VLAN ID and protocol type, to ensure that critical network services like VoIP, ERP, Intranet and video conference are prioritized. The switch also provides IGMP snooping to control multicast transmission and port mirroring to facilitate diagnostics. In addition, 802.3ad Link Aggregation allows high-speed links to be create
  • D-Link 10/100/1G L2 PoE Managed Switch+4x1000BaseT/SFP
    The DGS-3100-24P switch includes 2 dedicated HDMI stacking ports, each providing 5 Gbps stacking bandwidth. Up to 6 units can be stacked up in a linear or fault-tolerant ring topology, for up to 20 Gbps overall system bandwidth in full-duplex, bi-directional mode. A stack can be made up of any switch of the same family, providing up to 24 SFP fiber links. Units can be gradually added to the stack to accommodate growth. In addition, 802.3ad Link Aggregation allows multi-Gigabit links to be created between switches or to servers. The DGS-3100-24P features 802.3af PoE integrated into every switch port. Hence any 802.3af compliant device can be powered by the switch via the standard Ethernet cables, to a maximum of 15.4W per device. Combined with Gigabit connectivity, this provides future-proofing in preparation for next-generation 802.11n wireless devices. The DGS-3100-24P includes many security features including Access Control Lists (ACLs), 802.1X Port-Based/MAC-Based Access Control and 802.1X Guest VLAN so that network access is available only to authorised users. To enhance network resilience, the DGS-3100-24P supports Spanning Tree protocols, including 802.1D, 802.1w and 802.1s for redundant bridge paths. In addition, a unique feature, D-Link Safeguard Engine, allows administrators to configure thresholds that limit the impact of packet flooding to the switch's CPU typically caused by virus/worm outbreaks. This increases the switch's reliability and availability. Network administrators can define throughput levels for each port to manage bandwidth. Fine granularity down to 64 Kbps can be achieved. For Quality of Service (QoS), the switch supports 802.1p Priority Queues and packet classification based on ToS, DSCP, MAC, IP, VLAN ID and L4 protocol types, to ensure that critical network services like VoIP, ERP, Intranet and video conference are prioritised. The switch also provides IGMP snooping to control multicast transmission and port mirroring to facili
  • D-Link 2U/12 Bay IP-SAN Storage Enclosure (4 x 10GbE Ports)
    D-Link's DSN-6000 Series iSCSI SAN array is a fully redundant, data center-class network storage solution in a 2U rackmount form factor. The DSN-6000 Series currently supports 36TB of raw capacity using 3TB drives (and even greater capacity as larger disk drives become available), and overall scalability to 180TB using DSN-6020 Expansion Enclosure. D-Link's DSN-6000 Series provides 1GE or 10GE host interface connectivity which can handle over 200,000 I/O per second. The DSN-6000 Series integrates xStack storage architecture and supports services for applications demanding high throughput, scalability and flexible storage planning. The DSN-6000 Series can be easily implemented as primary storage, as secondary storage to supplement an existing infrastructure, or as a nearline storage device to improve backup and recovery times. Using the intuitive and integrated management GUI, the DSN-6000 Series Arrays can be seamlessly incorporated in both Physical and Virtual Server environments. The DSN-6000 Series can provide the failover and redundancy capabilities required for mission critical scenarios such as Virtual Machine (VM) shares, database hosting, Online Transactional Processing (OLTP), email applications, storage consolidation and other primary storage needs. It is equipped with fully redundant components for all major functions, such as RAID controllers, power supplies, fan modules, battery backup modules, and SAS JBOD expansion ports. The Hot-pluggable design is capable of providing uninterrupted services. In addition, the DSN-6000 Series incorporates advanced high availability features such as RAID 6 and RAID 60 support, writable snapshot, Microsoft Windows VSS support, and volume configuration restoration. These advanced features help to reduce or eliminate any system downtime. Unlike other vendors, D-Link's DSN-6000 Series is able to upgrade to firmware without the system going offline. Both firmware image and volume handling are well protected by the redund
  • D-Link 24-port 10/100/1G Smart Switch +4 RJ45/SFP
    D-Link's DGS-1210 series features D-Link Green technology. Equipped with 24 10/100/1000Mbps ports including 4 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management and security functions that provide performance and scalability. Management options for the switches include SNMP, Web Management, SmartConsole Utility, and compact command lines. The series also supports ACL filtering and D-Link's Safeguard Engine. Furthermore, the DGS-1210 series uses auto voice VLAN, ensuring higher priority for voice traffic. The DGS-1210-24 comes with a fanless design in 19" metal cases. These fans are set to low speed by default and will automatically switch to high speed once the temperature threshold is reached.
  • D-Link 48-port 10/100/1G Smart Switch +4 RJ45/SFP
    The DGS-1210-48 is part of D-Link's 3rd generation of Web Smart Switches that integrates advanced management and security functions for performance and scalability. With D-link Green technology now in its second generation, the DGS-1210-48 provides a complete, affordable and eco-friendly solution for small and medium businesses (SMB).
  • D-Link 48X10/100 L2 PoE Managed Switch+2x1GRJ+2x1GRJ/100F
    The DES-3052P is part of D-Link's family of premium devices in the entry-level network management category. With Power over Ethernet (PoE) support, 4 Gigabit uplinks, comprehensive network security, granular bandwidth control and extensive network management, this switch is rich in functions allowing organisations set up secure and effective departmental networks at an affordable cost. The DES-3052P provides 48 Ethernet ports and is equipped with 4 Gigabit uplinks, with the SFP supporting both fibre Gigabit and 100Base-FX fibre connection for specific applications. 802.3af PoE is integrated into every switch port. Hence any 802.3af compliant device can be powered by the switch via the standard Ethernet cables, to a maximum of 15.4W per device and 370 W for the switch. The DES-3052P includes many security features including Access Control Lists (ACLs), 802.1X Port-Based/MAC-Based Access Control and 802.1X Guest VLAN so that network access is available only to authorised users. To enhance network resilience, the switch supports Spanning Tree protocols, including 802.1D, 802.1w and 802.1s for redundant bridge paths. In addition, a unique feature, D-Link Safeguard Engine, allows administrators to configure thresholds that limit the impact of packet flooding to the switch's CPU typically caused by virus/worm outbreaks. This increases the switch's reliability and availability. Network administrators can define throughput levels for each port to manage bandwidth. Fine granularity down to 64 Kbps can be achieved. For Quality of Service (QoS), the switch supports 802.1p Priority Queues and packet classification based on ToS, DSCP, MAC, IP, VLAN ID and protocol type, to ensure that critical network services like VoIP, ERP, Intranet and video conference are prioritised. The switch also provides IGMP snooping to control multicast transmission and port mirroring to facilitate diagnostics. In addition, 802.3ad Link Aggregation allows high-speed links to be created bet
  • D-Link xStack 24x10/100 L2+ PoE Switch 2 Gigabit+2 Combo
    D-Link's DES-3528P is part of D-Link's xStack family of access Layer2 Ethernet switches that combine performance with robust security, Quality of Service (QoS), versatile management functions, Redundant Power Supply option and scalable flexibility. All these features make this switch an ideal stackable switch alternative to the expensive chassis-based solution. All 24 Ethernet ports on the switch include Power over Ethernet (PoE), with 8 of these providing up to 30 W per port, while the remaining adhere to the 802.3af standard at 15.4 W output per port. This gives administrators the ability to connect 802.3at pre-standard equipment such as new 802.11n wireless Access Points, in parallel with standard 802.3af equipment. The two combo 10/100/100Base-T SFP slots on the front panel provide flexible copper or fiber Gigabit connection. The two 10/100/1000BASE-T ports on the back panel are designed for flexible dual usage. They can be used either as stacking ports with 4 Gbps bidirectional stacking bandwidth, or can simply be used as copper Gigabit uplinks. Physical stacking capability (available on request) allows administrators to add up to eight switch units per stack on a scalable expansion basis. Virtual stacking functionality via D-Link SIM technology is included: this allows up to 32 units to be managed via a single IP address. The switch supports Multicast, allowing Triple-Play providers to bundle IPTV services with standard Internet access and telephony. With Double VLAN (802.1Q-in-Q), telcos can span the VLAN groupings of their enterprise customers across a Metropolitan Area Network (MAN), creating completely transparent LANs for them. In addition, the DES-3528P features state-of-the-art security technologies including centralized ACLs and IP-MAC-Port Binding with DHCP Snooping that effectively stops "Man in the Middle" attacks. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak.
  • HP ProCurve Switch 2910al 48Port POE
    HP 2910al switch series consists of four switches. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. Together with static and RIP IPv4 routing, robust security and management and enterprise-class features, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
  • D-Link Wireless N BT ADSL2+ Router with 4 Port 10/100 Switch
    **ULTIMATE INTERNET CONNECTION** The DSL-2740R wireless ADSL router is an affordable high performance ADSL router fit for homes and small offices. With integrated ADSL2/2+ supporting up to 24Mbps download speed, 802.11n draft wireless LAN, firewall protection, Quality of Service (QoS) and 4-port switch, this router provides all the essentials that a home or small office needs to establish a secure and high-speed remote link to the outside world. **AFFORDABLE HIGH-SPEED CONNECTION FOR HOMES & SMALL OFFICES** Designed as a very affordable high performance ADSL router for home and SOHO users, the DSL-2740R provides not only low-cost, high-speed Internet connection, but also the security and Quality of Service (QoS) required by users in today s high risk and versatile Internet environments. **READY WIRED & WIRELESS LAN CONNECTION** The DSL-2740R provides an integrated 802.11n draft WLAN interface supporting high wireless speeds and interoperability with 802.11b/g wireless devices on the 2.4GHz frequency band. It also provides four 10/100Mbps Ethernet switch ports for ready workstations connection. These built-in functions save you the cost and trouble of installing a separate wireless access point and an Ethernet switch. **FIREWALL PROTECTION & QoS** Security features prevent unauthorized access to the home and office network from Internet intruders. The router provides firewall security using Stateful Packet Inspection (SPI) and Denial of Service (DoS) attack protection. SPI inspects the contents of all incoming packet headers before deciding what packets are allowed to pass through. Router access control is provided with packet filtering based on port and source/destination MAC/IP addresses. For Quality of Service (QoS), the router supports multiple priority queues to enable a group of home or office users to experience the benefit of smooth network connection of inbound and outbound data without concern of traffic congestion. This QoS support all
  • D-Link Wireless-N Access Point (300Mbps)
    D-Link's Wireless N Open Source Access Point allows you to create your own personal wireless home network to share wireless Internet connection, documents, music, and photos. Using Wireless N technology, it offers a higher speed, extended coverage and virtually no dead spots while still compatible with previous network standards. This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage and cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router. Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering and the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function allows you to turn the wireless network off when not needed, saving energy. D-Link Click'n Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install and configure the device without prior knowledge required. Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform.
  • D-Link Wireless N Dual Band Access Point & Ethernet Bridge
    The DAP-1522 allows you to easily upgrade any router to support streaming of High-Definition (HD) multimedia content in your home over a wireless connection. This device will let you ‘bridge' between two different physical media, for example the wired Ethernet connection from the DVR and the wireless media of your wireless network. It transforms your wired device into a wireless one without any hassles of stringing cable wires. The DAP-1522 is certified for the Wi-Fi alliance's standard for wireless security at the touch of a button, Wi-Fi Protected Setup (WPS). With it, the wireless network name (SSID) and encryption keys are automatically generated and broadcast to the client devices. There is no need to memorize complicated passwords and key them in several times. This considerably simplifies the process of setting up security on the wireless network.
  • D-Link 8 Port PoE Gigabit Desktop Switch
    The DES-1008P 8-port switch can convey power to up to four network devices via the usual network cables using Power over Ethernet technology. This provides a cost-effective entry-level solution for users wishing to make the most of their network. The DES-1008P enables users to easily connect and supply power to devices such as wireless Access Points (AP), IP cameras and IP phones via the common network cables. As a switch, the DES-1008P can be used to share files, music and video across your network or create a multi-player gaming environment. Users can also add multiple computers, printers, Network Attached Storage (NAS) and any other Ethernet device onto a network. This device runs ultra-quiet, making it ideal for both home and small office use. In addition, it can be wall-mounted to save desktop space.
  • D-Link Securicam Full HD PoE Fixed Dome Network Camera
    D-Link's DCS-6112/6113 Full HD Fixed Dome IP Cameras feature industry-leading High-Definition (Full 1080p HD) Megapixel resolution and H.264 compression that enable high-quality video footage to be recorded. DCS-6112/6113 connect to a network to provide high-quality live video over the Internet. These cameras also feature a 3-axis inner bracket that allows for flexible observation area adjustment. With the free-bundled D-ViewCam 32-channel recording software, these IP cameras provide a complete solution for high-quality live viewing and reliable recording. The cameras also have a built-in MicroSD card slot which can be used for local backup by storing important events on an easily retrievable MicroSD card. The DCS-6112/6113 deliver Full HD 16:9 widescreen IP video surveillance which provides vivid high-quality video, making it easier to view and monitor footage. The DCS-6112/6113 support simultaneous streaming of H.264, MPEG-4, and MJPEG video to provide both high-quality and bandwidth-efficient compression formats. H.264 produces a small file size, making it useful for extended recording with high detail or for use in low-bandwidth networks. MJPEG delivers excellent file integrity, ideal for situations which require extensive image detail. Additionally, DCS-6112/6113 support multicast H.264 streaming, allowing users to view the camera feed by subscribing to a multicast IP address on the network. The DCS-6113 can be used during both day and night. The ICR filter allows the camera to capture crisp color images during the daytime and detailed grayscale at night, in low-night conditions, and even in complete darkness. Anti-tamper features make the DCS-6112/6113 cameras suitable for tamper-prone locations such as transportation hubs, schools, or correctional facilities. The electronic tamper detection system can sense whenever the camera has been redirected, de-focused, blocked, or spray-painted, and respond promptly with a visible or audible alarm. The D
  • D-Link Securicam Full HD PoE Day & Night Fixed Dome Network Camera
    D-Link's DCS-6112/6113 Full HD Fixed Dome IP Cameras feature industry-leading High-Definition (Full 1080p HD) Megapixel resolution and H.264 compression that enable high-quality video footage to be recorded. DCS-6112/6113 connect to a network to provide high-quality live video over the Internet. These cameras also feature a 3-axis inner bracket that allows for flexible observation area adjustment. With the free-bundled D-ViewCam 32-channel recording software, these IP cameras provide a complete solution for high-quality live viewing and reliable recording. The cameras also have a built-in MicroSD card slot which can be used for local backup by storing important events on an easily retrievable MicroSD card. The DCS-6112/6113 deliver Full HD 16:9 widescreen IP video surveillance which provides vivid high-quality video, making it easier to view and monitor footage. The DCS-6112/6113 support simultaneous streaming of H.264, MPEG-4, and MJPEG video to provide both high-quality and bandwidth-efficient compression formats. H.264 produces a small file size, making it useful for extended recording with high detail or for use in low-bandwidth networks. MJPEG delivers excellent file integrity, ideal for situations which require extensive image detail. Additionally, DCS-6112/6113 support multicast H.264 streaming, allowing users to view the camera feed by subscribing to a multicast IP address on the network. The DCS-6113 can be used during both day and night. The ICR filter allows the camera to capture crisp color images during the daytime and detailed grayscale at night, in low-night conditions, and even in complete darkness. Anti-tamper features make the DCS-6112/6113 cameras suitable for tamper-prone locations such as transportation hubs, schools, or correctional facilities. The electronic tamper detection system can sense whenever the camera has been redirected, de-focused, blocked, or spray-painted, and respond promptly with a visible or audible alarm. The D
  • D-Link 48-port 10/100/1000 + 4-port SFP Gigabit SmartPro Switch
    D-Link's DGS-1500 SmartPro family switches are designed for small/medium businesses who require functions like L3 Static Routing and Single IP Management (Virtual Stacking) without upgrading to a managed switch. The family integrates advanced management and security functions that are similar to those of a managed switch, but less complex. The switches feature D-Link Green 3.0 technology, which provide the added benefit of significant power savings. Additionally, the DGS-1500-28P's 10/100/1000 Mbps ports are PoE-enabled, offering ease-of-use and green features like Time-based PoE, which shuts the power off at a predetermined times. Compliant with 802.3af and 802.3at, these switches are capable of feeding power to devices of up to 30 Watts. Management options for the switches include SNMP, Web Management, SmartConsole Utility, and Compact CLI. The family also supports ACL filtering and D-Link's Safeguard Engine. The DGS-1500 family uses Auto Voice VLAN, ensuring higher priority for voice traffic. The DGS-1500-20 and DGS-1500-28 are both fanless which allows them to emit less heat and noise than a standard switch, making them suitable for office environments. The DGS-1500-28P and DGS-1500-52 both feature smart fans that use a thermal sensor that can detect temperature change, the smart fans can react accordingly by utilizing different fan speeds for different temperatures. The Smart Fan feature enables the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable and eco-friendly operation of the switch. D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-1500 SmartPro family implements D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power-saving features include being able to schedule when to turn off LEDs and ports when not in use, and
  • D-Link 24-port 10/100/1000 + 4-port SFP Gigabit SmartPro Switch
    D-Link's DGS-1500 SmartProfamily switches are designed for small/medium businesses who require functions like L3 Static Routing and Single IP Management (Virtual Stacking) without upgrading to a managed switch. The family integrates advanced management and security functions that are similar to those of a managed switch, but less complex. The switches feature D-Link Green 3.0 technology, which provide the added benefit of significant power savings. Additionally, the DGS-1500-28P's 10/100/1000 Mbps ports are PoE-enabled, offering ease-of-use and green features like Time-based PoE, which shuts the power off at a predetermined times. Compliant with 802.3af and 802.3at, these switches are capable of feeding power to devices of up to 30 Watts. Management options for the switches include SNMP, Web Management, SmartConsole Utility, and Compact CLI. The family also supports ACL filtering and D-Link's Safeguard Engine. The DGS-1500 family uses Auto Voice VLAN, ensuring higher priority for voice traffic. The DGS-1500-20 and DGS-1500-28 are both fanless which allows them to emit less heat and noise than a standard switch, making them suitable for office environments. The DGS-1500-28P and DGS-1500-52 both feature smart fans that use a thermal sensor that can detect temperature change, the smart fans can react accordingly by utilizing different fan speeds for different temperatures. The Smart Fan feature enables the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable and eco-friendly operation of the switch. D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-1500 SmartPro family implements D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power-saving features include being able to schedule when to turn off LEDs and ports when not in use, and w
  • D-Link 16-port 10/100/1000 + 4-port SFP Gigabit SmartPro Switch
    D-Link's DGS-1500 SmartProfamily switches are designed for small/medium businesses who require functions like L3 Static Routing and Single IP Management (Virtual Stacking) without upgrading to a managed switch. The family integrates advanced management and security functions that are similar to those of a managed switch, but less complex. The switches feature D-Link Green 3.0 technology, which provide the added benefit of significant power savings. Additionally, the DGS-1500-28P's 10/100/1000 Mbps ports are PoE-enabled, offering ease-of-use and green features like Time-based PoE, which shuts the power off at a predetermined times. Compliant with 802.3af and 802.3at, these switches are capable of feeding power to devices of up to 30 Watts. Management options for the switches include SNMP, Web Management, SmartConsole Utility, and Compact CLI. The family also supports ACL filtering and D-Link's Safeguard Engine. The DGS-1500 family uses Auto Voice VLAN, ensuring higher priority for voice traffic. The DGS-1500-20 and DGS-1500-28 are both fanless which allows them to emit less heat and noise than a standard switch, making them suitable for office environments. The DGS-1500-28P and DGS-1500-52 both feature smart fans that use a thermal sensor that can detect temperature change, the smart fans can react accordingly by utilizing different fan speeds for different temperatures. The Smart Fan feature enables the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable and eco-friendly operation of the switch. D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-1500 SmartPro family implements D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power-saving features include being able to schedule when to turn off LEDs and ports when not in use, and w
  • D-Link 50cm/10GbE stacking cable for DGS-3120 Series
    D-Link is an industry pioneer, market leader, designer and true manufacturer of networking communications and digital home electronic products. Excellence in manufacturing, innovation and a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point. D-Link DEM-CB50 is a 10Gig Stacking Cable.
  • D-Link SFP+ Direct Attach Stacking Cable, 1M
    This cable is suitable for stacking DGS-3420-series switches, DGS-3620-series switches, DSN-6410/6420 SANs and for 10Gigbit connectivity between devices with 10G SFP+ ports.
  • D-Link 24-PORT 10/100 SMART SWITCH
    D-Link's 24-port Third Generation Smart Switch is part of D-Link's third generation of Web Smart Switches, designed to provide Small to Medium Businesses complete control over their network. In a 19" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation and IGMP Snooping. Network maintenance features include Loopback Detection and Cable Diagnostics. The DES-1210-28 features state-of-the-art security technologies including ACL filtering and IP-MAC-Port Binding. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DES-1210-28 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (QoS) and granular bandwidth control down to 64 kbps are also included. A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's SmartConsole utility is also included for the joint management of several switches.
  • D-Link Boxee Box by D-Link
    The Boxee Box by D-Link brings all the stuff you normally watch on a computer to your TV; movies and TV programs streamed from the Internet, 400 different apps that let you access content from most popular websites, and a full web browser just in case we missed anything. The Boxee Box will also help you rediscover your own media collection by automatically identifying all the files on a hard drive or home network and then building a stunning visual media library for you. And just so you don't end up watching the same stuff over and over, the Boxee Box pulls recommendations from your friends on Facebook and Twitter to help you discover new favorites. All this plus a unique QWERTY remote so you can search, login, and browse with ease.
  • D-Link Wireless N Network Camera with mydlink
    The DCS-930L, Wireless N Home Network Camera, is a versatile monitoring solution for your home or small office. With mydlink included, this camera provides the simplest way to access and manage your camera, whether via your computer or app on your iPhone, Android or tablet. No technical knowledge required! Connecting a camera to your network and accessing it has traditionally required complex configuration. Thanks to mydlink home monitoring is now made simple. mydlink makes it easy to access your camera from wherever you are, whenever it's convenient for you- for free. A step-by-step guide has your camera up and running in a matter of minutes. Then via a simple website you can set up a mydlink account allowing you to view and manage your camera from any Internet connected computer. If you have more than one camera, you can add it to your existing mydlink account and watch all your cameras from a single location. Accessing your cameras on the go is easy too. Just download the free mydlink app for your iPhone or Android and you can quickly and easily view your camera feed from anywhere with a wireless or 3G connection. This camera includes additional features such as motion detection and email alerts, via the User Interface. This makes the camera a truly comprehensive home monitoring system for those that want to do more. You can easily set up a detection area (i.e. a window, or your garage door) on the camera's User Interface, so that emails will be sent to you to notify you of any motion detected. You can also view up to 32 cameras from a Windows computer using the included free D-ViewCam software (DCS-100). D-ViewCam also has a robust set of features including centralized alert management and video/audio recording. The DCS-930L camera includes Wireless N technology for wider coverage around your home. Wireless N also allows you to stream high-quality video to remote sites over the Internet. A Site Survey feature also allows you to view and conn
  • D-Link 8-Port 10BaseT 100BaseTX
    D-Link switches are economical to own, simple to operate, and flexible for use in a variety of applications. They present effective, affordable and easy-to-implement solutions to meet demands for higher network loads and quicker response time in small workgroups or medium-sized departments. Blazing speed and raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, and in full duplex mode, any workstation in your network can receive 20Mbps or 200Mbps of data from any port.
  • D-Link 4-Bay SATA NAS Storage
    This Network Storage Enclosure provides small businesses with a central network point to store, share and back up valuable files. With 5 hard drive modes available including RAID0/1/5 and Active Directory support, this enclosure is ideal for server deployment in offices. The DNS-343 accommodates up to four 3.5" SATA hard drives (not included). Tools or cables are not required for setup. Simply slide the front cover, insert the drives and slide the front cover back. The DNS-343 includes a USB port, for print server functionality or the monitoring of an Uninterruptible Power Supply (UPS) unit. It features Gigabit Ethernet connectivity with support for Jumbo frames. Its smart fans adopt a lower speed when the temperature drops below 49 °C; the drives are also able to enter a hibernation state. A built-in OLED screen updates you on drive quotes, server status, and other integral system information in real time.
  • D-Link Multifunction Print Server 2 USB 1 Parallel Port
    The DPR-1061 Multifunction Print Server is a versatile multi-port print server ideal for home office, school or business use. Providing one parallel and two USB ports for printer connections, this device gives users the option of adding multiple printers, multifunction printers, or scanners to the network. The DPR-1061 provides security by allowing the administrator to configure user access right to network printers and equipment. It supports a wide range of network OS including: Windows 95/98/ME/NT 4.0/2000/XP/Vista/7, Apple MacOS with AppleTalk, Linux, Solaris, SCO Unix, IBM AIX and NetWare 5.x native ND S. The DPR-1061 supports the Internet Printing Protocol (IPP), enabling remote users to output files to their office printer even when they are off site. HP PJL protocol is also supported for bi-directional network printer communication, providing network administrators with critical information about the network printer. The DPR-1061 includes D-Link's Click'n Connect software (DCC). This intuitive wizard is run directly from the product CD-ROM. In a few simple steps, it takes you through setting the Print Server up and configuring the attached printers (15 languages supported).
  • D-Link Wireless N USB Nano Adapter IEEE 802.11n/11b
    D-Link's Wireless N USB Nano Adapter delivers high performance wireless networking to a laptop or desktop PC via the ultra-fast USB 2.0. Its exceptionally small size means that you can keep it plugged in even when you're on the move. With Wireless N technology, you get more speed, extended coverage and virtually no dead spots with the assurance that devices remain compatible with previous network standards. Securing the wireless network has never been easier, with Wi-Fi Protected Setup (WPS) which works at the touch of a button. The DWA-131 supports WEP, WPA and WPA2 encryption methods and includes a configuration utility to find available wireless networks and show quality/signal strength. Installation is a breeze: simply insert the enclosed CD into your computer and the installation wizard - available in 18 languages! - will do the rest. No experience required.
  • D-Link MultifunctionPrint Server 10/100Mbps 1 USB port
    The DPR-1020 USB Multifunction Print Server is a compact and versatile print server ideal for home office, school and business use. Supporting scan, fax, and print functions, this device gives you the option of sharing one USB multifunction printer between multiple users. The DPR-1020 supports a wide range of network OS including: Windows 95/98/ME/NT 4.0/2000/XP, Apple MacOS with AppleTalk, Linux, Solaris, SCO UNIX, IBM AIX and NetWare 5.x native ND S. The Internet Printing Protocol (IPP) supported by the DRP-1020 allows remote users to output files to their home or office printer even when they are off site. The DPR-1020 includes D-Link's Click'n Connect software (DCC). This intuitive wizard is run directly from the product CD-ROM. In a few simple steps, it takes you through setting the Print Server up and configuring the attached printers (15 languages supported).
  • D-Link DCS 7110 HD Outdoor Day & Night Network Camera
    The D-Link DCS-7110 is a high-definition outdoor day & night network IP camera, ideal for small-to medium business applications and remote monitoring over the Internet. With built-in IR LEDs, a progressive CMOS sensor, and ICR technology packed in a compact weatherproof outdoor housing, this camera delivers megapixel images under any lighting conditions, including complete darkness. To maximize bandwidth efficiency and improve image quality, the DCS-7110 provides real-time video compression using the H.264, MJPEG and MPEG-4 codecs. Furthermore, the DCS-7110 supports 4 separate profiles for simultaneous video streaming and is capable of recording in H.264, MJPEG and MPEG-4 compression at megapixel resolution. This kind of versatility enables a wide variety of security applications, such as watching live video through a 3GPP enabled mobile device, or recording to a Network Storage device in high quality while monitoring the same images at lower resolutions. The DCS-7110 supports Power over Ethernet (PoE) connectivity for discreet installation in virtually any indoor or outdoor location. The camera's built-in 802.3af compliant PoE module eases the installation process by reducing the need to drill holes or lay additional electrical cabling. The DCS-7110 includes external audio support, and input/output ports for connectivity to external devices such as IR sensors and alarm relays. It also comes with an RS-485 interface, providing connectivity to an optional pan/tilt enclosure. Designed to be mounted outdoors, the DCS-7110 is built in an IP66 certified enclosure which protects against the elements and extreme temperatures in a range of -20° to 50°. The tamper detection feature can sense whenever the camera has been redirected, de-focused, blocked, or spray-painted, and respond promptly with a visible or audible alarm. The DCS-7110 comes with an ICR Filter which can be manually applied via the web, or set to automatically adjust based on lighting conditions.
  • D-Link 24-Port 10/100/1000 Gigabit Smart PoE Switch + 4co
    DGS-1224TP is part of D-Link's next generation Web Smart Gigabit switch series, which blends plug-and-play simplicity with exceptional performance and reliability for small and medium-sized business (SMB) networking. Housed in a new style rack-mount metal case with easy-to-view front panel diagnostic LEDs, this switch provides extensive security features and the option to connect fiber links with its 4 SFP expansion slots. Each port of this switch has the ability to provide power over the Ethernet cables to devices such as IP phones, wireless Access Points and IP surveillance cameras, provided they comply with the 802.3af specification. The switch provides MAC address filters to screen access to the network. It supports 802.1X port-based authentication, allowing the network to be configured with external RADIUS servers. Additional features like the D-Link Safeguard Engine protect the switch against traffic flooding caused by virus/worm outbreaks. The switch supports 802.1Q VLAN Tagging for traffic segmentation by groups to enhance network security and performance. It also supports 802.1p Priority Queues, enabling administrators to run bandwidth-sensitive applications such as streaming multimedia and VoIP on the network. These functions allow the switch to work seamlessly with managed VLAN and 802.1p traffic on the network. Implemented as a complete L2 device, this switch includes functions such as Jumbo frame support, IGMP snooping, port mirroring, Spanning Tree, port trunks and 802.3x Flow Control to enhance network performance and reliability. Switch configuration and management are provided by the SmartConsole utility or a web-based GUI. SmartConsole is an easy way to access the switch from a local PC; there is no need to type in any IP address or subnet as all switches connected on the network are displayed on the screen for instant access. Innovative technology in this switch provides energy savings, by powering down ports when the connected c
  • D-Link 2U/12 Bay IP-SAN Storage Enclosure (8 x 1GbE ports)
    D-Link's DSN-6000 Series iSCSI SAN array is a fully redundant, data center-class network storage solution in a 2U rackmount form factor. The DSN-6000 Series currently supports 36TB of raw capacity using 3TB drives (and even greater capacity as larger disk drives become available), and overall scalability to 180TB using DSN-6020 Expansion Enclosure. D-Link's DSN-6000 Series provides 1GE or 10GE host interface connectivity which can handle over 200,000 I/O per second. The DSN-6000 Series integrates xStack storage architecture and supports services for applications demanding high throughput, scalability and flexible storage planning. The DSN-6000 Series can be easily implemented as primary storage, as secondary storage to supplement an existing infrastructure, or as a nearline storage device to improve backup and recovery times. Using the intuitive and integrated management GUI, the DSN-6000 Series Arrays can be seamlessly incorporated in both Physical and Virtual Server environments. The DSN-6000 Series can provide the failover and redundancy capabilities required for mission critical scenarios such as Virtual Machine (VM) shares, database hosting, Online Transactional Processing (OLTP), email applications, storage consolidation and other primary storage needs. It is equipped with fully redundant components for all major functions, such as RAID controllers, power supplies, fan modules, battery backup modules, and SAS JBOD expansion ports. The Hot-pluggable design is capable of providing uninterrupted services. In addition, the DSN-6000 Series incorporates advanced high availability features such as RAID 6 and RAID 60 support, writable snapshot, Microsoft Windows VSS support, and volume configuration restoration. These advanced features help to reduce or eliminate any system downtime. Unlike other vendors, D-Link's DSN-6000 Series is able to upgrade to firmware without the system going offline. Both firmware image and volume handling are well protected by the redund
  • D-Link Wireless-N Dual Band Gigabit PoE Managed Access Point
    The D-Link DAP-2590 AirPremier N Dual Band PoE Access Point provides businesses with a solution for deploying next generation draft 802.11n local area networks (LANs). Designed specifically for business-class environments, such as large or enterprise corporations, this access point provides secure and manageable dual band wireless LAN options for network administrators. The DAP-2590 AirPremier N Dual Band PoE Access Point allows network administrators to arrange a highly manageable and extremely robust dual band wireless network. All three detachable dual band antennas supply optimal wireless coverage in either 2.4GHz (802.11g and draft 2.0 802.11n) or 5GHz (802.11a and draft 2.0 802.11n) frequency bands. Enclosed in a plenum-rated metal chassis, the AirPremier N Dual Band PoE Access Point adheres to strict fire codes for placement in air passageways. For advanced installations, this high-speed access point has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available. The DAP-2590 delivers reliable wireless performance with maximum wireless signal rates of up to 300Mbps in either the 2.4GHz or 5GHz wireless band. Support for the Wi-Fi Multimedia (WMM) Quality of Service feature, makes it an ideal access point for audio, video, and voice applications. Additionally, this access point supports load balance features to ensure maximum performance.
  • D-Link Securicam 12x Speed Dome H.264 Network Camera
    D-Link's DCS-6616 12X Speed Dome IP Camera is a PTZ surveillance solution that can cover large areas and low-light environments. Built with a Sony Super HAD-II 1/4" CCD sensor, the DCS-6616 can capture 650 TVL high-resolution video with excellent image quality. A built-in IR-cut removable filter allows the camera to capture video in both bright and dark environments. During the day, the IR-cut filter moves out of the way to provide high-quality images. At night, the IR-cut filter stays in, allowing the camera to use all available light for low-light surveillance. The DCS-6616 is built with an extensive set of PTZ features that allow large areas to be monitored easily. Endless 360° panning allows the camera to sweep an area easily, and 12X optical zoom with auto focus provides the ability to zoom in and focus on an event for more detail. Panning speed is variable and proportional to the zoom ratio for precise control over camera movement. The DCS-6616 can also be set to follow preset sequence paths at set speeds for customized automatic surveillance. The DCS-6616 includes input and output ports that allow connectivity to external devices such as IR sensors, switches, and alarm relays. It includes audio input and output ports, and a video output for direct connection to a TV for live monitoring. The Wide Dynamic Range (WDR) function provides clear images even under backlit conditions where the intensity of illumination can vary significantly, making the DCS-6616 perfect for extreme high-contrast environments. For example, when placed indoors, the DCS-6616 will adjust itself to the intense sunlight that may be streaming in through a nearby window. This makes it an ideal solution for security applications. The DCS-6616 supports simultaneous streaming of H.264, MPEG-4, and MJPEG video to provide both high-quality and bandwidth-efficient compression formats. MJPEG delivers excellent file integrity, and is ideal for situations which require high image detail. H
  • D-Link KVM Switch Pro Connect 4 Port USB 2X CABLES
    The D-Link DKVM-4U KVM switch allows you to control up to 4 PCs using only one monitor, keyboard and mouse. The monitor and the two input devices are connected directly to this KVM switch and not to the client computers. The DKVM-4U is also a cost effective solution for control of several servers in a computer room, allowing an engineer to handily manipulate all connected computers from a single monitor, keyboard and mouse. Each KVM cable set includes a video cable for PC's VGA connector, and a single USB 2.0 cable for the PC's USB port. From the KVM switch box, you can connect to 2 USB devices: a USB keyboard and a USB mouse. 2 sets of KVM cables are provided for ready connection to 2 computers, the remaining KVM cables are optional. You can switch quickly between the individual client computers by pushing a button on the DKVM-4U or by pressing the hot keys on your keyboard. The KVM switch confirms the switchover with an acoustic signal, and has LEDs indicating which PC is currently being served by the console. All connected PCs are automatically scanned every 10 seconds, so your monitor, keyboard and mouse are updated whenever you switch to a selected PC. CAPS LOCK, NUM LOCK and SCROLL LOCK key's status for each computer is automatically recalled. The DKVM-4U guarantees that the client PC does not crash when it is disconnected from KVM switch box. The DKVM-4U is capable of supporting the most demanding resolutions (VGA, SVGA and Multisync monitors) of up to 2048 x 1536 at 75Hz refresh rate (bandwidth up to 400MHz) without any noticeable degradation in image quality.
  • D-Link WLAN N 2.4/5Ghz Business Router DUAL WAN, 70 VLAN, SSL
    D-Link's DSR-1000N Unified Services Router is a secure, high performance networking solution to address the growing needs of small and medium businesses. Integrating high-speed Wireless N and mobile 3G support, the DSR-1000N offers comparable performance to traditional wired networks but with fewer limitations. Optimal network security is provided via features such as virtual private network (VPN) tunnels, IP Security (IPSec), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), and Secure Sockets Layer (SSL), making it ideal for SMB and branch offices that need a secure, reliable connection to remote resources. The DSR-1000N includes dual-WAN Gigabit Ethernet which provides policy-based service management, ensuring maximum productivity for your business operations. The failover feature maintains data traffic without disconnecting when a landline connection is lost. The Outbound Load Balancing feature adjusts outgoing traffic across two WAN interfaces and optimizes the system performance resulting in high availability. The second WAN port can be configured as a DMZ port allowing you to run isolated servers on your LAN. Designed to deliver superior wireless performance, the DSR-1000N includes Wireless N on either the 2.4 GHz or 5 GHz radio bands. Multiple In Multiple Out (MIMO) technology allows DSR-1000N to provide high data rates with minimal "dead spots" throughout the wireless coverage area. The DSR-1000N supports 3G mobile connectivity via its USB ports. This capability offers an additional secure data connection for networks that provide critical services. The DSR-1000N can be configured to automatically switch to a 3G network whenever a physical link is lost. A fully featured virtual private network (VPN) provides your mobile workers and branch offices with a secure link to your resources. Site-to-site VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP)
  • D-Link Securicam Full HD 3 MP Day-Night WDR Network Camera
    The D-Link DCS-3716 is a high-end Full HD Day & Night WDR IP Camera, equipped with a 1/2.8" 3 Megapixel WDR Progressive Scan CMOS sensor and a 3.1-8.0 mm DC auto iris lens. The DCS-3716 captures video in both dark and light environments, or even subjects shot against a backlight by neutralizing imperfect lighting and generating a realistic image. In addition, the removable IR-cut filter for day/night functionality provides clear detail and high quality video at any hour of the day. The DCS-3716 incorporates Power over Ethernet (PoE) and an SD card slot, allowing it to be easily installed in a variety of locations. The DCS-3716 supports simultaneous streaming of H.264, MPEG-4, and MJPEG video to provide both high-quality and bandwidth-efficient compression formats. MJPEG delivers excellent file integrity, ideal for situations which require high image detail. H.264 and MPEG-4 produce a small file size, useful for extended recording or for use in low-bandwidth networks. Additionally, the DCS-3716 supports multicast H.264 MPEG-4 streaming, allowing users to view the camera feed by subscribing to a multicast IP address on the network. The DCS-3716 includes input and output ports allowing connectivity to external devices such as IR sensors, switches, and alarm relays. It also comes with an RS-485 interface, providing connectivity to an optional pan/tilt enclosure which effectively adds pan/tilt functionality to the DCS-3716. An additional 12 V interface provides power for an optional LED illuminator. The DCS-3716 comes with a ICR Filter which can be manually applied via the web, or set to automatically adjust based on lighting conditions. This feature allows the camera to capture crisp color images during the daytime, and grayscale images at dark. The Wide Dynamic Range (WDR) function provides clear images even under backlit conditions where the intensity of illumination can vary significantly, making the DCS-3716 perfect for extreme high-contrast environments
  • D-Link BT ADSL2+ Wireless G Router with 4 Port 10/100 Switch
    The DSL-2640R wireless ADSL router is an affordable high performance ADSL router fit for homes and small offices. With integrated ADSL2/2+ supporting up to 24Mbps download speed, 802.11g wireless LAN, firewall protection, Quality of Service (QoS) and 4-port switch, this router provides all the essentials that a home or small office needs to establish a secure and high-speed remote link to the outside world.
  • D-Link Wireless N Unified Service Router
    D-Link's DSR-250N Unified Services Router is a secure, high performance networking solution to address the growing needs of small and medium businesses. Integrating high-speed Wireless N and USB support, the DSR-250N offers comparable performance to traditional wired networks but with fewer limitations. Optimal network security is provided via features such as virtual private network (VPN) tunnels, IP Security (IPSec), Point-to- Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), and Secure Sockets Layer (SSL), making it ideal for SMB and branch offices that need a secure, reliable connection to remote resources. Designed to deliver superior wireless performance, the DSR-250N includes Wireless N on the 2.4 GHz radio band. Multiple In Multiple Out (MIMO) technology allows DSR-250N to provide high data rates with minimal "dead spots" throughout the wireless coverage area. A fully featured virtual private network (VPN) provides your mobile workers and branch offices with a secure link to your resources. Site-to-site VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP) to facilitate branch office connectivity through encrypted virtual links. As a concerned member of the global community, D-Link is devoted to providing eco-friendly products, which save power and money while extend the product's lifespan. The D-Link Green WLAN Scheduler reduces wireless power automatically during off-peak hours. Likewise the D-Link Green Ethernet technology adjusts power usage based on the detected cable length and link status. In addition, compliance with RoHS (Restriction of Hazardous Substances) and WEEE (Waste Electrical and Electronic Equipment) directives make D-Link Green certified devices the environmentally responsible choice.
  • D-Link AirPremier 108AG Wireless Switch Access Point
    DWL-8500AP Wireless Switching 108 AG Access Point is a high-performance wireless access device that provides up to 108Mbps transmission rates and flexible dualband wireless connectivity. The DWL-8500AP delivers concurrent wireless performance with maximum wireless signal rates in both frequency bands simultaneously. With dualband connectivity, two wireless networks are created both running at full bandwidth speeds, offering a significant increase in total network capacity. At the same time, the DWL-8500AP remains fully backward compatible with the 802.11b standard in the 2.4GHz frequency. With transmission speeds of up to 108Mbps (Turbo mode) on both frequency bands, the DWL-8500AP is an ideal solution for bandwidth intensive WLAN application. In a typical working environment with multiple users accessing the network at the same time, the DWL-8500AP can operate at double times the throughput of regular 802.11g wireless LAN equipment. For maximum coverage, the DWL-8500AP can be placed at out-of-the-way locations such as on a ceiling or a high wall, where AC outlets are inaccessible and providing power to these locations is difficult and expensive. DWL-8500AP plays a key role in rogue detection. It continuously scans both frequency bands and their associated channels to root out rogues while simultaneously providing wireless connectivity to mobile clients. If a rogue is detected, the closest DWL-8500AP can launch RF counter measures by spoofing 802.11 control messages. This prevents clients from communicating, associating and authenticating with a rogue.
  • D-Link Xtreme Wireless-N PCI-Express Adapter
    Upgrade your computer's Wi-Fi and access the Internet quickly and easily from anywhere in your home or office. This adapter delivers high performance wireless networking to a desktop PC via the ultra-fast PCI Express (PCIe) interface. Wireless N technology offers more speed, extended coverage and virtually no dead spots while still compatible with previous network standards. This adapter transfers data at speeds of up to 300 Mbps. The DWA-556 supports WEP, WPA and WPA2 encryption methods and includes a configuration utility to find available wireless networks and show quality/signal strength. No experience required, simply insert the enclosed CD into your computer and the installation wizard will do the rest.
  • D-Link Wireless N Dual Band USB Mini Adapter
    **If you want to stream HD video throughout your house, then this is the adapter for you. When used with a Dual Band Router, it operates on two bands so you can avoid interference and stream away** The D-Link® Xtreme N® Dual Band USB Adapter (DWA-160) is the latest addition to the award-winning Xtreme N product family. The DWA-160 is designed for users looking to get a reliable wireless connection that can handle High-Definition (HD) video streams throughout the house. This is achieved by using the DWA-160 together with an 11n dual band router (D-Link DIR-855 or DIR-825 recommended). **BENEFITS OF DUAL BAND** The dual band N technology in the DWA-160 supports selectable 2.4GHz or 5GHz wireless signals. This allows you to check e-mail and browse the Internet using the 2.4GHz band or stream HD movies and other media on the 5GHz band. The 5GHz wireless band is the best technology available for wirelessly streaming HD videos across your network. It achieves this by operating in a clear wireless band to help avoid interference that may slow down and limit the range of current wireless technologies like 802.11g*. The DWA-160 is also backward compatible to 802.11g, which means it can be used in existing 802.11g networks. **EASY TO SET UP, EASY TO USE** The D-Link Quick Adapter Setup Wizard guides you step-by-step through the installation process. Configure this USB adapter without having to call a networking expert to help you. The DWA-160 features a Wi-Fi Protected Setup™ (WPS) Push Button for easy connection to a wireless network. The D-Link Wireless Manager is also included with this product to keep track of your most frequently accessed networks so that you can join them quickly and easily. With unmatched wireless performance, reception, and security, the D-Link Xtreme N Dual Band USB Adapter (DWA-160) is the best choice for easily adding or upgrading wireless connectivity to your PC. **XTREME N™ DUAL BAND ADAPTER BENEFITS** -Delivers up to 14x
  • D-Link High Gain Outdoor Antenna
    The D-Link ANT24-1800 is a high-Gain antenna ideal for point-to-point environment.
  • D-Link ADSL2+ Ethernet Modem 1x10/100
    The DSL-320B ADSL2+ Ethernet Modem is a high-speed broadband modem which connects to any computer with an available Ethernet port, or to a broadband router to share high-speed Internet access with a group of users at the office. Featuring the latest ADSL2/+ standards, this modem provides speeds of up to 24 Mbps downstream and 2 Mbps upstream. Setting up the modem is easy even for non-technically minded people, with D-Link Click'n Connect: run directly from the product CD-ROM, this wizard takes you through an interactive step-by-step guide which gets you on-line in minutes.
  • D-Link 24 Port POE Managed WLAN Layer2+ Gigabit Wireless Switch with PoE
    D-Link's DWS-3024L L2+ Unified Wired/Wireless Gigabit Switch is optimized for wireless network deployment in business environments. With this device, business can install high performance, secure, manageable and scalable unified wired/wireless LAN switching. Equipped with combo SFP, Power over Ethernet and redundant power supply (RPS) support, this switch provide enterprises with easy upgrade to next-generation 802.11n wireless LAN, simple deployment of wireless devices regardless of physical locations, and centralized management/policy enforcement of wireless mobility.
  • D-Link 7-Port USB 2.0 Hub
    The DUB-H7 is a 7-port Universal Serial Bus USB 2.0 hub that allows you to connect up to 7 USB 2.0 peripherals and devices to your USB 2.0 ready PC or iMac. Providing an out of the box industry standard bus, this pocket-sized device expands your PC and Mac by adding 7 USB 2.0 ports to your system. A single Type B upstream port is provided to connect to the host computer, or another USB hub. Configured directly by the operating system, the DUB-H7 operates seamlessly with both Microsoft's OpenHCI, Intel's Universal HCI and USB 2.0 new generation specification EHCI. As a standard USB hub, it buffers USB data from any attached peripherals or devices in compliance with USB specification versions 1.1 and 2.0 to provide an invisible extension of the USB bus. Supporting both low-speed 1.5Mbps devices, full-speed 12Mbps devices and high-speed 480Mbps, each port creates a bridge between the peripheral and host computer.
  • D-Link 12-Port Gigabit xStack L3
    With 12 SFP slots, the DGS-3612G provides a full fibre environment for long distance Ethernet infrastructure. It is particularly suitable for ISPs in their Metropolitan Area Network (MAN) deployments. In addition, four 1000Base-T copper ports acting as combo with 4 of the SFP slots are included for flexibility. With D-Link Single IP Management (SIM) technology, up to 32 switch units -regardless of the model- may be combined in a virtual stack. Multiple switches can be configured, monitored and maintained from any workstation running a web browser via a single IP address. The stack is managed as a single object, as all stacked units are identified by this single IP address. A simple yet powerful web-based interface allows the administrator to perform most management and configuration tasks. The DGS-3612G includes advanced routing features, such as OSPF v2, Passive Interface, Not-So-Stubby Area (NSSA), Equal Cost Route and RIP. Multicast services such as IP-TV and Video on Demand (VoD) are supported with the inclusion of protocols such as IGMP, MLD and PIM. With Double VLAN (802.1Q-in-Q) support, ISPs can create Layer2 Virtual Private Networks (VPNs) and transparent LANs for their customers. A complete set of security features is provided for connectivity and access control. These include Access Control Lists (ACLs) based on MAC address, switch port, IP address and/or TCP/UDP port numbers. 802.1X Authentication and MAC address control functionality is furthermore featured. The switch also provides central management for administration access via TACACS/TACACS+ and RADIUS. In addition, when implemented in conjunction with a D-Link NetDefend firewall, this switch is able to automatically quarantine any host displaying abnormal behaviour. This mechanism, D-Link's ZoneDefense, provides proactive network security by preventing viruses from spreading through the network and thwarting harmful network attacks. The DGS-3612G switch provides VLAN support including G
  • D-Link 24-Port xStack Gigabit Layer 2/3/4 Managed Switch
    Several DGS-3627 switches may be physically stacked, using low-cost CX4 10 Gigabit copper modules. In this configuration, one or two 10-Gigabit uplinks may be created, depending on whether the linear or fault-tolerant ring stacking1 is implemented. Up to 12 switches can be stacked in this way. Using the low-cost coaxial cable as the medium to stack switches together provides not only high-bandwidth stacking but also the flexibility to add 10-Gigabit uplinks strictly as needed. The three open slots can also be used for optional 10-Gigabit XFP fiber uplinks to servers or a backbone connection. With D-Link Single IP Management (SIM) support, you can easily add up to 32 switch units -regardless of the model- in a virtual stack in addition to your physical stack. Multiple switches can be configured, monitored and maintained from any workstation running a Web browser via one single IP address. The stack is managed as a single object, as all stacked units are identified by a single IP address. A simple yet powerful web-based interface allows you to perform most management and configuration tasks. A complete set of security features is provided, which includes L2/L3/L4 multi-layer Access Control Lists (ACLs) and 802.1X user authentication via TACACS+ and RADIUS servers. The switch also offers suppression capabilities and Layer3 IPv4/v6 static routing to increase network performance and security. In addition, when implemented in conjunction with a D-Link NetDefend firewall, this switch as a stand-alone or in a stack, is able to automatically quarantine any host displaying abnormal behaviour. Finally, D-Link's ZoneDefense, provides proactive network security by preventing viruses from spreading through the network and thwarting harmful network attacks. The DGS-3627 switch provides VLAN support including GARP/GVRP and 802.1Q to enhance network security and performance. The switch implements a robust set of multi-layer (L2, L3, L4) QoS/CoS features to ensure that cr
  • D-Link 48-Port xStack Gigabit Layer 2/3/4 Managed Switch
    The xStack DGS-3600 series of next generation Layer 3 Gigabit switches delivers performance, flexibility, security, multi-layer QoS and access, and redundant power option for SMB and enterprises. With high Gigabit port densities, SFP support, 10-Gigabit uplink options and advanced software functions, these switches can act as departmental access layer devices or core switches to form a multi-level network structured with high-speed backbone and centralized servers. Telecom service providers can also take advantage of the high SFP density switches to form the core of their Fiber to the building (FTTB) network that extends to the subscribers' sites. Easy to deploy and simple to managed, the DGS-3600 series can be stacked with any switches supporting D-Link's Single IP Management to form a multi-level network structured with backbone and centralized high-speed servers. This virtual stack can comprise units located anywhere on the same network domain, and uses the optional 10- Gigabit uplinks to move intra-stack traffic at 20Gbps full duplex. It can eliminate single points of failures, cable distance barriers, physical stacking method limitations and the need for stacking cabling. The DGS-3600 series provides a complete set of security features, which includes L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. In addition, it offers suppression capabilities and Layer 3 IP v4/v6 Static Routing to increase network performance and security. Built-in D-Link ZoneDefense technology allows business to integrate the switch stack with D-Link NetDefend firewalls to implement a full coverage, proactive security architecture. The DGS-3600 series offers extensive VLAN support including GARP/GVRP and 802.1Q VLAN to enhance security and performance. To support converged applications including VoIP, ERP, Intranet and video conference, a robust set of L2/L3/L4 QOS/CoS features ensures that critical network services are serve


  • Other Product Previews from Dabs Direct Online Catalogue:

    Save on this QNAP TS-859U-RP+ 8TB Solution
    QNAP TS-859U-RP+ 8TB Solution
    Save on this HP HP BL460C G7 L5640 LV12G 1P SVR
    HP HP BL460C G7 L5640 LV12G 1P SVR
    Save on this Smart Technologies SMART Board Interactive Whiteboard System 660i5 - whiteboard
    Smart Technologies SMART Board Interactive Whiteboard System 660i5 - whiteboard


    "Buy Now, Pay Later" - Buy on Credit from Dabs Direct:

    Sometimes, for whatever reason, it's just not possible to pay for a product in full, at the time of purchase. That's why a Dabs Direct Credit Account can be so handy. When you purchase with instant credit from Dabs Direct you can be sure of two things: firstly that you're getting a good deal, and secondly that you won't miss out on a great product (such as this D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+) just because you can't afford to pay for it in full right away. Take your time ... weeks or even months, the choice is yours; and then, if you want to pay off your account at any time, no problem, you can do that as well.

    Not many UK electronics companies offer credit these days, and so when you find a well-known company such as Dabs Direct which offers instant approval credit accounts, with the balance not due for several months, then it's a deal too good to miss. Spreading the cost of your electronics purchase makes a lot of sense for many people, and although you may accrue some interest when using your Dabs Direct instant credit account, since the account is not a zero-interest account, the benefits are obvious, and more than worthwhile. So, the D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+ can be yours for a lot less than you might imagine, and if you don't want to pay for it right away, then it's no problem.

    So, if you're interested in owning the D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+, then you can buy it right now and either spread the cost or pay in full when you purchase, using a credit card or debit card. Additionally, once you've shopped at Dabs Direct, then you can also take advantage of other special offers from Dabs Direct Electrical.


    Other UK Shops and Services:

    Contents Insurance   •   UK Pet Insurance   •   Littlewoods UK   •   BT Internet   •   Liverpool Victoria   •   Tmobile.co.uk   •   Nationwide UK   •   Superdrug   •   RAC Insurance   •   Wedding Insurance   •   Legal General   •   Liverpool Victoria   •   Thorntons UK



    © 2011 ezShop Direct, UK. Product Page: D-Link xStack 48port 10/100/1000/10G L2+ Stack Switch+4x10GE SFP+